These models PE1 and PE2 (80C to 151E) of our ABS EffeX range are designed specially for use in standard pumping stations. They are equipped with premium-efficiency (IE3) motors ranging between 1.3 to 30 kW. In addition to IE3 motors, five other major benefits of our ABS Effex range are:

- Long-term reliability
- Greater energy saving
- Excellent rag handling
- Future-proof design
- Sustainable in manufacturing and operation.

Read more about the ABS EffeX range at our campaign site www.abseffex.com

Read more about the premium efficiency standard at www.wikipedia.org/premium_efficiency

Stainless steel pump for corrosive media with vortex hydraulics available with or without float switch. A combination of high grade (AISI 316) stainless steel, static seals of Viton and mechanical seal of silicon carbide, plus other features, make this the ideal pump for chemically contaminated wastewater, industrial effluent, and for use in agriculture. Discharge 2".

The Robusta series has been designed for pumping clear and wasterwater from house, garden or yard, and is supplied with built-in level control and check valve.
The pump and motor section form a pressure-tight encapsulated unit, fully flood-proof, with motor housing constructed from corrosion resistant material, and the outer jacket and impeller of durable plastics. The unique hand/auto switch makes the pump suitable for manual or automatic operation.

The Robusta 1 is a special model designed for pumping wastewater and drainage water down to very low levels, of almost 1mm.

Sewage pumps with shredding action used for reliable and economical discharge of effluent under pressure, using small diameter discharge lines in communal schemes. For effluent removal from houses especially in rural areas where high ground must be overcome, or where only small diameter pipework can be laid. Other applications include effluent removal from motorway service stations and campsites, large construction sites, urban renewal and renovation of buildings. Pumped medium: sewage and other heavily polluted wastewater.

Complete unit with floor-drain for under-floor installation and non-gravity feed drain-off applications in general. Odour-sealing systems and damp-course adapter units are available. The tank is made from a robust corrosion-resistant synthetic material.
Nirolift will be supplied as standard without pump, and with pipework. The required pump must be ordered seperately and fitted. Robusta 200 and MF 054-334 are suitable for use with the Nirolift.

Compact faecal pumping unit for direct connection of 1 WC and also suitable for connection of 1 wash-hand basin, 1 shower and 1 bidet.

The unit is supplied ready for plugging in and comprises a gas and odour tight synthetic tank fitted with a powerful Piranha grinder pump which is controlled automatically by the integral level control system. As the waste is cut up thoroughly it is possible to pump it away through pipes of 25 mm (1") size.

Flood-proof lifting stations for automatic sewage pumping from areas below the backwash level in accordance with DIN/EN. The Piranhamat 701 - 1002 is used for reliable and economical discharge of wastewater under pressure using small diameter pipelines. Piranhamat is fitted with ABS submersible grinder pumps of the Piranha range for problem-free pumping of wastewater containing faecal matter under pressure in pipelines from DN 32 (1 1/4").

Ideal for locations where the diameter of the discharge line is restricted.

Flood-proof lifting station for the automatic removal of sewage from areas below the back-wash level in accordance with DIN 1986. Ideal for effective sewage removal from apartments, large buildings and for both new and renovated structures. Robust synthetic (PE) collection tank of compact design. Easy to transport. Simple discharge line connection by means of the patented quick coupling system. A variety of inlet port sizes DN 50/100/150, in various locations to suit all applications, is standard with all units.

Flood-proof lifting station for the automatic removal of sewage from areas below the back-wash level in accordance with DIN 1986. Ideal for effective sewage removal from multi-family housing units, large buildings, hotels, hospitals, etc., and for both new and renovated structures. Robust and corrosion resistant synthetic (PE) collection tank with compact design. Easy to transport with small dimensions, passes through a standard door opening. A range of inflow ports at different heights and stepped in different diameters, designed for DIN push-on sleeve connection system. Simple discharge pipe connection by means of a patented quick-coupling system.

A compact wastewater lifting station for wash-basin connection. The vent system is designed to prevent odours and no vent pipe is necessary. Sanimax has an air filter insert with flood-proof characteristics, hose connection for washing machines, low-level emptying and pre-assembled cable inlet.

The wastewater pump is a standard Robusta or MF pump, which is prefitted into the tank.

Provides automatic wastewater removal from rooms and areas below the backwash level where discharge by gravity mains is not easily established. Collection sump of robust, corrosion-resistant synthetic material. Simple pipe connection using push-on pipe connectors. This is a larger unit than the Nirolift and the unique design is suitable for one or two Robusta, Coronada, MF or Piranha 08/09 type pumps.

Robust, reliable, ABS submersible sewage and wastewater pumps from 1 to 3 kW for the dewatering of buildings and sites in private, commercial and communal areas as well as industrial applications. Water pressure-tight encapsulated fully flood-proof motors in standard or explosion-proof versions. Hydraulics with ContraBlock system or vortex impellers for blockage free operation. Suitable for portable as well as in stationary installations. Avaiable in discharge sizes DN 50 (2 inch), DN 65 (2 1/2 inch), DN 80 (3 inch)

Synthetic pre-fabricated sump for ABS submersible pumps designed as a single or twin pumping station for the automatic pumping of wastewater and sewage from locations below the sewer backwash level. Designed for installation below ground outside of a building.

Simple economic installation with four inlet ports DN 150. Simple pipe connection by means of DIN push-on connections. Self-sealing high level coupling system. Ideal for pumps of the PIRANHA or AS ranges. Fitted with anti-floatation collar for secure retention of the SYNCONTA in position.

The SYNCONTA is ideal for applications where wastewater must be removed from buildings and areas below sewer level and where gravity discharge into the sewer is not possible. The sump is installed outside the building on open ground and is an effective, quick and economical solution to
the sewage problems of the contractor and architect. Suitable for vehicular traffic if used with appropriate lid.

MF 054 - 804 is a compact submersible pump for wastwater with vortex impeller, having large free passage for excellent solids handling. The water tight, fully flood proof cast iron motor and the hydraulics section comprise a compact robust unit construction. The pumps are used for dewatering of buildings and others sites, and for pumping effluent from low lying locations.

The MF 565 - 665 series is designed for passing solids of up to 60mm, and is therefore ideal for use in pumping domestic sewage. This range is also available with or without automatic level control.

Dry-installed sewage pump for horizontal or vertical installation,
with air-cooled IEC motor from 3 to 22 kW. Suitable for
the pumping of wastewater and sewage from buildings and
sites in private, commercial, industrial and municipal areas in
accordance with EN 12050-1.

Flood proof lifting station for the automatic removal of sewage from areas below the back-wash level, in accordance with DIN 1986. Ideal for effective sewage removal from apartments, large buildings and for both new and renovated structures. Robust synthetic (PE) collection tank of compact design. Easy to transport and install. Simple discharge line connection by means of the patented quick coupling system. A variety of inlet port sizes DN 50/100/150, in various locations to suit all applications, is standard with all units.